Terratrac TT 220 - Specifications
| Engine |
Detroit Diesel VM D703 TE2, 2,100 cm³, 3-cylinder
with turbo-charger, 4-stroke, direct injecttion,
water-cooled, 48 kW (65 HP) at 2600 rpm
to ECE R24, max. torque 220 Nm at 1400 rpm. |
| Electrical System |
12 V, 120 A alternator, 88 Ah high-performance
cold-start battery, automatic pre-heat
system. |
| Transmission |
Transmission Continuously variable hydrostatic with adjusting
pump, adjusting motor and 2-speed output
gearbox. The vehicle-drive control system can
be switched on and off. |
| Speeds |
Forward and reverse: off-road 0-9.5/
0-20 km/hr, road 0-16/0-40 km/hr. |
| Power take-off |
Standard 1 3/8 inches profile, 6 splines, dry singleplate
clutch operated electro-hydraulically, can
be engaged and disengaged under load.
Speeds: front 550 and 1090 rpm, rear 580 and
760 rpm, pre-selectable separately front and
rear. Direction of rotation clockwise. |
| Axle drive |
Permanent 4-wheel drive with Torsen interaxle
differential and fully-lockable differentials
in the front and rear axle, operated electrohydraulically. |
| Steering |
Steering Hydrostatic 4-wheel steering, switchable to
front-wheel steering by push-button control,
change of steering mode at will by automatic
detection and synchronisation of wheel position
via inductive sensors. Turning circle radius
with all-wheel steering: 3.2 m (lock: 40°).
With double tyres, turning circle radius 4.0 m
(lock limit: 30°). |
| Tires |
Select from: Low pressure Terra-tyres
33x15.50-15 or 31x15.50-15, turf tyres
33x15.10-15. |
| Brakes |
Hydraulic twin-circuit servo foot-brake operating
on all wheels, in addition hydraulic driving
brake. |
| Driver's cab |
Dust-proof all-round view comfort cab, vibration
and noise damping, with safety frame (tested
to 79/622/EEC), front windscreen, sidescreens
and glass door curved, openable rear
screen. All screens tinted. Air conditioning unit.
Ergonomic seat with multiple adjustments, plus
lap seat-belt. |
| Operation |
A total of 24 functions can be controlled via the
drive lever. Using the keypad to the right of the
driver, additional hydraulic-system functions,
and also the heating and air-conditioning system
can be controlled, and operating sequences
such as coupling up front and rear lifting
equipment for example can be programmed.
All information about the operating state and
important settings are shown via a display or
with indicator lights. |
| Hydraulics |
Bosch solenoids, pressure 175 bar, deliveryrate
36 l/min at engine speed of 2600 rpm, oil
contents for hydraulic cylinders 10 litres. |
| Front hydraulic |
3 point Cat.I, displaceable sideways hydraulicsystem
cally, with quick-connection capture sockets
and top-link, controllable via multi-function control
lever, max. lifting force 1400 daN at 175
bar. With self-regulating load transfer and automatic
calibration. Vibration absorption for road
travel. |
| Rear hydraulic |
3-point Cat. I + II, raising, lowering, carrying,
system floating setting, lifting-rods with crank-adjustment,
max. lifting force 1400 daN at 175 bar.
Quick-action coupling mechanism with cat I/II
and cat. II balls. |
| Hydraulics Equipment |
Hydraulic couplings 10, DWASD, front and
Equipment rear; 1 x double-acting with float setting and
valves. |
| Towing mechanism |
Automatic trailer hitch with quick-action adjustment
(height above ground 339-939 mm). |
| Dimensions |
Length 3940 mm
Width 1900 mm
Height 2080 mm |
| Weights |
Kerb weight TT220 2220-2380 kg
TT240 2285-2445 kg
Permissible front-axle loads 2100 kg
Permissible total laden weight 3400 kg
Trailer load, unbraked max. 1500 kg
Trailer load, braked max. 3500 kg
Trailer load with
independent brake max. 6000 kg
Hitch load max. 600 kg |
| Capacities |
Fuel tank: 85 litres. |
| Supplementary Equipment |
Supplementary - Pair of 7.50-16 or 6.50-16 wheels for fitting
equipment double tyres at front and/or rear, pair of front
mud guard, snow chains, Hydraulic couplings
4, DWAS- front and rear, 1 x double-acting
with floating setting, Hydraulic couplings 5,
DWAS- front and rear, 1 x double-acting,
weight transfer coupling EHH/-, rear, with lowering
flow control valve SDH/- and automatic
calibration. Vibration absorption for road travel,
front cardan-shaft, heavy construction with
freewheel, overload clutch and protection device.
Hydraulic top link. Rear screen washer,
working headlights front and/or rear, revolving
light, snow clearance lighting, hydraulic single
wheel brakes acting on the rear wheels, coolant
heater on request, diesel particle filter. |
|
Technical specifications are subject to change
without notice. |
|